Transmission
60
1
Entering a tone
This function allows a machine connected to a pulse dialing line to send tonal
signals (for example if you want to use a special service on a tone dialing line).
When you press the {Tone} key, the machine dials the number using tonal signals.
This section explains how to use the tone function with On Hook Dial as an example.
A Press the {On Hook Dial} key.
B Enter the fax number using the number keys.
C Press the {Tone} key.
D Enter the number you want to tone dial using the number keys.
E Press the {Start} key.
If you want to cancel a transmission, press the {Clear/Stop} key, and then re-
move the originals.
After transmission, the standby display appears.
Note
❒ Certain services may be unavailable even when using the {Tone} key.
❒ A tone is shown as a “ ” on the display and the next numbers are dialed
using tonal signals.
To Next Page
Loading...
