Transmission
104
1
Canceling a Transmission
This section explains how to cancel a fax transmission.
Important
❒ Remember that the Communicating indicator turns off almost immediately
when an Internet Fax is being sent.
Before the Original Is Scanned
Use this procedure to cancel a transmission before pressing the {Start} key.
A Press the {Clear Modes} key.
Note
❒ When originals are placed into the ADF, you can cancel transmission sim-
ply by removing them.
While the Original Is Being Scanned
Use this procedure to cancel a transmission while the originals are being
scanned after the {Start} key has been pressed.
A Press the {Clear/Stop} key.
The machine stops scanning.
Note
❒ You can also cancel scanning by pressing [Stop Scanning].
❒ Scanning may be completed while you are performing the cancel operation.
To Next Page
Loading...
Need help?
General
