Transmission
42
1
D Press [OK].
“
Area 1” or “Area 2” is shown above the highlighted [Scan Area].
To cancel the selected scan size, select [Auto Detect].
E Specify a destination, and then press the {Start} key.
Reference
“Facsimile Features”, General Settings Guide
Mixed Original Sizes
Select this to individually scan the size of originals loaded into the ADF.
For example, when A3L and A4K size originals are sent together, usually all
are sent using the size of the first original. By selecting Mixed Original Sizes, the
machine scans and sends each original according to its size.
Important
❒ The sizes of the originals that can be placed in this mode are follows:
•Metric version
A3L, B4 JISL, A4KL, B5 JISKL
•Inch version
11" × 17"L, 8
1
/
2
" × 14"L, 8
1
/
2
" × 11"KL, 5
1
/
2
" × 8
1
/
2
"KL
❒ You can place two different sizes of originals in the ADF at the same time.
A Place the original, and then select the scan settings you require.
B Press [Scan Area].
To Next Page
Loading...
