Printing Options
183
3
Reverse Order Printing
Normally, pages of the received document are printed and stacked on the tray
in the order they are received. If you turn this function on, the machine will start
printing the document from the last page received.
Note
❒ You can turn this function on or off using RX Reverse Printing in the Facsim-
ile Features menu.
❒ When this function is on, the first page is printed last.
❒ This function uses Memory Reception.
Reference
“Facsimile Features”, General Settings Guide
Page Reduction
If you receive a document that is longer than the paper in the tray, the machine
usually prints it on two pages. If you turn this function on, the machine reduces
the width and length of the received image so that it will fit on one page.
If A4L paper is loaded and a document of B4 JISL size is received, the machine
will reduce the document to a single A4L sheet.
To Next Page
Loading...
