Fax via Computer
258
6
Setting LAN-Fax Driver Properties
This section explains how to set properties required for using the LAN-Fax Driver.
Note
❒ If your operating system is Windows NT 4.0, Windows 2000/XP, or Windows
Server 2003, log on using an account that has Administrator rights.
Setting print properties
This section explains how to make settings such as paper size or resolution.
A On the [Start] menu, point to [Settings], and then click [Printers].
With Windows XP Professional or Windows Server 2003, select [Printers and
Faxes] on the [Start] menu.
With Windows XP Home Edition, select [Control Panel] on the [Start] menu.
Next select [Printers and Other Hardware], and then [Printers and Faxes].
B Select to highlight [LAN-Fax M7], then click [Properties] on the [File] menu.
With Windows NT, click [Document Defaults...] on the [File] menu.
C When using Windows 98/Me, click the [Paper] tab to set the following properties.
• Paper Size
• Orientation
•Tray
•Resolution
•Gray Scale
• Print as Graphics
D When using Windows NT 4.0, set the following properties.
• Paper size
• Orientation
•Tray
•Resolution
E When using Windows 2000/XP or Windows Server 2003, click the [Printing
Preferences...] button to set the following properties.
• Paper size
• Orientation
•Tray
•Resolution
F Click [OK].
To Next Page
Loading...
Need help?
General
