Changing/Confirming Communication Information
220
4
Printing Received and Stored Documents
Use the following procedure to print documents saved on the hard disk.
A Press [Information].
B Press [Print / Delete Stored RX File].
C Select a file to be printed, and then press [Print].
To cancel printing, press [Cancel].
To delete the document after printing, press [Delete File after Printing].
To perform two-sided printing, press [Print on 2 Sides] before pressing the
{Start} key.
D Select the printing mode, and then press the {Start} key.
To stop printing after pressing the {Start} key, press [Stop Printing]. The dis-
play returns to that of step
C
.
E Press [Exit] twice.
The standby display appears.
Note
❒ This function allows you to print only received and stored documents.
❒
You cannot print and delete received documents using the Document Server function.
❒ You can specify and print multiple documents. For the maximum number
of documents you can specify at a time, see “Maximum Values”.
Reference
p.291 “Maximum Values”
“Facsimile Features”, General Settings Guide
To Next Page
Loading...
