Fax via Computer
278
6
To edit machine properties already programmed
Follow these steps to use Web Image Monitor to edit information about the des-
tination machine registered in the Address Book.
A Start the Web browser.
B Enter the IPv4 address of the machine you want to monitor after “http://” in
the address field.
The top screen is displayed.
C Click [Login], and then enter the Administrator's name and password.
D Click [Address Book] in the left pane.
The Address Book is displayed.
E Click the radio button to the left of the machine you want to modify, and
then click [Change].
The [Change User] page appears.
F Set the properties for Internet Fax data format other than the mode selection.
If you change the mode to “Simple Mode”, you cannot set machine properties.
G Click [OK] at the upper-right of the screen.
To cancel the setting, click [Cancel] in the upper-right of the screen.
The Address Book is displayed.
H Close the Web browser.
To Next Page
Loading...
