Other Transmission Features
140
2
Requesting a reception notice
You can confirm sent documents were properly received using e-mail or the
Journal.
The receiver sends back a reception notice message. Once the reception notice
message is received, “OK” appears in the Result column of the Journal, allowing
the originator to verify the transmission was received.
Important
❒ The Reception Notice feature is only available if the receiver supports MDN
(Message Disposition Notification).
A Place the original, and then select the scan settings you require.
B Specify the sender.
For details about specifying senders, see “Sender Settings”.
C Press [Sub TX Mode].
D Press [E-mail Options].
E Select [On] or [Off] for Recept. Notice.
To Next Page
Loading...
