Ricoh Aficio MP 3500SP - Polling Reception Reserve Report

Other Transmission Features
128
2
F Specify the destination, and then press the {Start} key.
Note
❒ A Polling ID may be any four numbers (0 to 9) and characters (A to F), ex-
cept 0000 and FFFF.
❒ To receive a document sent by Default ID Polling Transmission or ID
Override Polling Transmission, it is necessary to specify the same Polling
ID as the sender's. Free Polling Transmission does not require the same
Polling ID.
❒ Polling Reception Result Report allows you to verify Polling Reception has
taken place.
❒ You can program one of the Quick Operation keys with operations for this
function. Using the key allows you to omit step
A
.
Reference
p.96 “Setting SEP Codes for Reception”
p.129 “Polling Reception Result Report”
“Facsimile Features”, General Settings Guide
Polling Reception Reserve Report
This report is printed after Polling Reception is set up.
Note
❒ You can turn this function on or off with the User Parameters (switch 03, bit 3)
in the Facsimile Features menu.
❒ You can have a destination displayed with the User Parameters (switch 04, bit 4)
in the Facsimile Features menu.
❒ You can display a sender name with the User Parameters (switch 04, bit 5) in
the Facsimile Features menu.
Reference
“Facsimile Features”, General Settings Guide