Scan Settings
51
1
Original Type
If the original contains photographs, illustrations, or diagrams with complex
shading patterns or grays, select the appropriate original type to optimize image
clarity.
❖ Text
Select [Text] to send high-contrast black-and-white image originals. Use this
setting when you only want to send clearer text, even if the original contains
text and photographs.
❖ Text / Photo
Select [Text / Photo] to send an original containing both a high-contrast black-
and-white image, such as text, and a halftone image, such as a photograph.
❖ Photo
Select [Photo] to send an original containing a halftone image, such as a pho-
tograph or a color original.
A Press [Original Type].
B Select the original type you require, and then press [OK].
Note
❒ If you select [Text / Photo] or [Photo], the transmission will take longer than
when [Text] is selected.
❒ If you send a fax document with [Text / Photo] or [Photo] and the background
of the received image is dirty, reduce the density setting and resend the fax.
❒ You can set the original type that is selected right after the machine is
turned on or the {Clear Modes} key is pressed, with [Original Type Priority]
under Gen. Settings/ Adjust in the Facsimile Features menu.
To Next Page
Loading...
Need help?
General
