Transmission
100
1
F To specify a Receiving Station using the Transfer Station's destination list,
select [q Quick Dial], and then enter the registration number of the destina-
tion list.
For example, to select the registration number stored in Quick Dial 01 of the
Transfer Station, enter: {0} {1}.
G To specify a Receiving Station using the Transfer Station's Speed Dial, se-
lect [qp Speed Dial], and then enter the number of the Speed Dial code.
For example, to select the number stored in Speed Dial 12 of the Transfer Sta-
tion, enter: {1} {2}.
H To specify a Receiving Station using the Transfer Station's Group Dial, se-
lect [qpp Group Dial], and then enter the number of the Group number.
For example, to select the number stored in Group Dial 04 of the Transfer Sta-
tion, enter: {0} {4}.
I To specify another Receiving Station, press [Add].
Press [U Prev.] or [TNext] to see the Receiving Stations already entered. You
can select a Receiving Station from this list and remove it by pressing [Clear]
or the {Clear/Stop} key.
To Next Page
Loading...
