12
Reference
“Facsimile Features”, General Settings Guide
Transfer Report For the Requesting Party to be able to receive
Transfer Result Reports from the Transfer
Station, the Requesting Party must program
the number of the telephone line that is con-
nected to their own machine.
Program Confidential ID Program a Confidential ID to print a Confi-
dential Reception.
Program Polling ID Program a Polling ID to use the Transfer Re-
quest, Transfer Station, Default ID Polling
Transmission, and Default ID Polling Recep-
tion functions.
Program Memory Lock ID Program a Memory Lock ID to be entered be-
fore printing documents when the Memory
Lock function is activated.
Select Dial / Push Phone Use this function to select a line type when
the machine is connected to a G3 analog line.
Reception File Setting Selects whether received documents are
saved on the hard disk to be printed later or
printed immediately without being saved.
Stored RX File User Setting The administrator can be specified for man-
aging documents stored on the machine after
fax documents are received. To specify the
administrator, enter the administrator user
code for managing documents using Web
Image Monitor or DeskTopBinder.
Menu Protect Using Menu Protect, you can prevent unau-
thenticated users from changing the user
tools.
Folder Transfer Result Report You can set whether the Folder Transfer Re-
sult Report is transmitted to the specified e-
mail address, when folders are programmed
as the forwarding destinations to which doc-
uments are sent from all senders or Special
Senders.
Function name Description
To Next Page
Loading...
Need help?
General
