Changing/Confirming Communication Information
232
4
D If a password has been set for the box, enter the password, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
To cancel entering a password, press [Cancel]. The display returns to that of
step
C
.
E Place the original, and then select the scan settings you require.
You can also select the following settings:
•Book Fax
• 2 Sided Original (The optional ADF is required.)
• Stamp (The optional ADF is required.)
F Press the {Start} key.
The machine starts to scan the original.
To stop scanning, press [Stop Scanning]. The display returns to that of step
C
.
G Press [Exit].
To store a document in another Information Box, repeat from step
C
.
H Press [Exit].
The standby display appears.
Note
❒ One Information Box stores one file.
❒ The stored file is not deleted automatically. If you want to delete a stored
file, see “Deleting Information Box Documents”.
Reference
p.234 “Deleting Information Box Documents”
To Next Page
Loading...
Need help?
General
