Transmission Modes
23
1
C Select the scan settings you require.
D Using the number keys or a Destination key, specify a destination.
If you make a mistake, press the {Clear/Stop} key, and then enter the correct
number.
To select a destination from the Address Book, see “Using the Address Book
to Specify Destinations”.
E Press the {Start} key.
The machine dials a destination.
After transmission, the standby display appears.
Note
❒ Documents are not stored in memory.
Reference
p.36 “Placing Originals”
p.49 “Resolution”
p.51 “Original Type”
p.52 “Image Density (Contrast)”
p.58 “Sending Over a Fax Line”
p.61 “Sending by IP-Fax”
p.70 “Using the Address Book to Specify Destinations”
p.72 “Specifying Group Destinations”
p.73 “Chain Dial”
p.74 “Redial”
To Next Page
Loading...
