Specifying a Destination
75
1
C Select the destination you want to redial to.
D Press the {Start} key.
Note
❒ To redial a fax number, do not dial any numbers before you press the
{Pause/Redial} key. If you press the {Pause/Redial} key after entering num-
bers using the number keys, a pause is entered instead.
❒ You can specify Internet Fax and IP-Fax destinations using the Redial func-
tion. Select this function before pressing [Manual Input].
❒ When the date and time the original was scanned appears as a key, select
by pressing it.
❒ When you press [ProgDest], you can register a selected recipient in the des-
tination list.
❒ For the maximum number of redials the machine can store, see “Maximum
Values”.
Reference
p.78 “Registering Entered Destinations to the Address Book”
p.291 “Maximum Values”
To Next Page
Loading...
