Bit Switches - 2
D418 86 SM
I-fax Switch 02 (SP No. 1-102-003)
No Function Comments
The "displayed" string is included in the Subject string.
10: Reserved
11: Reserved
A mail requesting a Return Receipt sent from an IFAX with this switch set to "00"
(for "dispatched") received by Microsoft Outlook 2000 may cause an error. If any
setting other than "displayed" (01) causes a problem, change the setting to "01" to
enable normal sending of the Return Receipt.
Media accept feature
4
This setting adds or does not add the media accept feature to the answer mail to
confirm a reception.
0: Does not add the media accept feature to the answer mail
1: Adds the media accept feature to the answer mail.
Use this bit switch if a problem occurs when the machine receives an answer
mail, which contains the media accept feature field.
5-6 Not Used
Image Resolution of RX Text Mail
7
This setting determines the image resolution of the received mail.
0: 200 x 200
1: 400 x 400
The "1" setting requires installation of the Function Upgrade Card in order to have
enough SAF (Store and Forward) memory to receive images at 400 x 400
resolution.
I-fax Switch 03 (SP No. 1-102-004)
No Function Comments
Original Output at Transfer Station
0
This setting determines whether the original is output at the transfer station when
it is received from the sender that initiated the transfer transmission. This feature
To Next Page
Loading...
Need help?
General