Paper Feed
SM 4-97 D062/D063/D065/D066
Replacement
and
Adjustment
When the customer is experiencing feed problems
Remove:
Feed unit (
p.4-92)
1. Loosen the hex screw [A].
2. The separation roller gear [B] is positioned at the groove before shipping.
3. Do one of the following:
To adjust for thick paper, move the separation roller gear [B] to the left to decrease
the pressure.
To correct misfeeds, move the separation roller gear to the right to increase the
pressure.
4.11.12 RELAY SENSOR
To Next Page
Loading...
Need help?
General