MFP Options
SM 2-117 D062/D063/D065/D066
Installation
SP No. Setting Comment
copied to Palm2.
Note: This setting preserves the quality of the original
image, especially with J2K files, but also requires more time
for copying and requires more disk space to store the larger
files.
2.20.8 HDD ENCRYPTION UNIT TYPE A (D377)
Accessory
Check the quantity and condition of the accessories in the box against the following
illustration and list.
No. Description Q'ty
1. SD Card 1
Before You Begin the Procedure
1. Make sure that the following settings are not at the factory default settings:
Supervisor login password
Administrator login name
Administrator login password
These settings must be set up by the customer before the encryption option
can be installed.
2. Confirm that "Admin. Authentication" is on:
[User Tools]> "System Settings"> "Administrator Tools"> "Administrator Authentication
Management"> "Admin. Authentication"> "On"
If this setting is "Off" tell the customer that this setting must be "On" before you can do
the installation procedure.
3. Confirm that "Administrator Tools" is selected and enabled:
[User Tools]> "System Settings"> "Administrator Tools"> "Administrator Authentication
Management"> "Available Settings
Rev. 08/03/2009
To Next Page
Loading...
Need help?
General