Optional Equipment
D062/D063/D065/D066 1-10 SM Appendix
Staple Position
4 Modes
1 Staple: Front, Rear, Rear-Oblique
2 Stapes: 2 locations
Staple Capacity 5000 staples/cartridge
Staple Supply Cartridge or Staple Replacement
Sheets Sets Sizes
10 to 100 200 to 30
2 to 9 150
A4 SEF, B5 SEF, 8.5" x 11" SEF
A4 LEF, B5 LEF, 8.5" x 11" LEF
10 to 50 150 to 30
Stapled Stack Size
2 to 9 150
A3, B4, 11" x 17", 8.5" x 14"
Trim Waste Staple
Capacity
30,000 or more
Waste Staple Hopper
Full Detection
Provided
Power Consumption Less than 100 W
Power Source DC 24 V (From Mainframe)
Size (W x D x H) 800 x 730 x 980 mm (31.5" x 28.7" x 38.6")
Weight Less than 65 kg (143 lb.)
1.2.4 PUNCH UNIT TYPE 1075 (B531)
The Punch Unit B531 is installed in the Finisher SR4050 (D460).
Punch Hole Positions
2/3-hole (North America)
2/4-hole (Europe)
Punch Paper Size
2-Hole (NA)
A5 to A3 SEF, 11" x 17" to 5.5" x 8.5" SEF
A5 to A4 LEF, 8.5" x 11" LEF, 5.5" x 8.5" LEF
To Next Page
Loading...
Need help?
General