Using the Debug Log
D062/D063/D065/D066 5-28 SM
6. Repeat this procedure to select either 002 or 004.
Example 2: To set an SC code with 003
This example shows you how to enter "672" for SC672.
For details about SC code numbers, please refer to the SC tables in Section "4.
Troubleshooting".
1. Select "SP5858-003".
SP5858-003
Any SC Code
2. Push [#Enter].
0000000
_
3. Push [#Enter] to toggle the on the number display in the 2nd line.
0000000
0
4. Push
or to display "2".
0000000
2
5. Push [#Enter] to enter the "2" in the line above.
0000002
_
6. Push
or to move the cursor to the next digit.
To Next Page
Loading...
Need help?
General