Jam Detection
SM 6-5 D062/D063/D065/D066
Trouble-
shooting
4. Replace a gear if its cutout and arrow are not in the same position.
5. When you replace Gear [A] or Gear [B], be sure to put the metal face on the outer side,
and the arrow must be in view.
6. If a replacement gear is not available, do this as a temporary procedure:
Remove the paper feed unit.
Remove the gear.
Clean the gear shaft and inside the gear.
Attach the gear.
Install the paper feed unit.
To Next Page
Loading...
Need help?
General