Ricoh Aficio MP 8001 SP User Manual

Service Call Conditions
D062/D063/D065/D066 3-42 SM Appendix
Finisher tray 1 (upper tray lift) motor error
750 B
The upper tray paper height
sensor does not change its status
with the specified time after the
tray raises or lowers. The 1st
detection failure issues a jam
error, and the 2nd failure issues
this SC code.
 Tray lift motor disconnected,
defective
 Upper tray paper height sensor
disconnected, defective
 Finisher main board connection to
motor loose
 Finisher main board defective
Return roller motor error
753 B
Occurs during the operation of
the lower tray pressure motor.
 Motor harness disconnected, loose,
defective
 Motor overloaded
 Home position sensor harness
disconnected, loose, defective
 Home position defective
Shift Motor Error: 3K Finisher (B830)
755 D
The shift tray half-turn sensors:
Failed twice to detect the shift tray at the home position at the specified time.
-or-
Failed twice to detect that the shift tray had left the home position.
If the motor is operating
1. Half-turn sensor 1, 2 harnesses loose, broken, defective
2. One of the half-turn sensors is defective
If the motor is not operating:
1. Motor blocked by an obstruction
2. Motor harness loose, broken, defective
3. Motor defective
4. Finisher main board defective

Ricoh Aficio MP 8001 SP Specifications

General

Brand	Ricoh
Model	Aficio MP 8001 SP
Category	Printer
Language	English