Service Program Mode Tables
D062/D063/D065/D066 4-92 SM Appendix
4th
The number of the week for the day selected at the 3rd digit.
If "0" is selected for "Sunday", for example, and the selected
Sunday is the start of the 2nd week, then input a "2" for this
digit.
5th, 6th
The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so
on.
7th The number of hours to change the time. 1 hour: 1
8th
If the time change is not a whole number (1.5 hours for
example), digit 8 should be 3 (30 minutes).
001 Setting
Enables/disables the settings for 002 and 003.
[0 to 1/1]
0: Disable, 1: Enable
003 Rule Set (Start) The start of summer time.
004 Rule Set (End) The end of summer time.
Access Control DFU
5401
This SP adjusts the settings below when installing and SDK application.
Note: "SDK" is the "Software Development Kit". This data can be converted from
SAS (VAS) when installed or uninstalled.
103 Default Document ACL
Used to assign the default access user access privileges to their own documents
on the document server.
162 Extend Certification Detail
Logout without an IC card.
[0 to 1/0/1]
0: Not allowed (default)
1: Allowed
200 SDK1 Unique ID
To Next Page
Loading...
Need help?
General