Service Program Mode Tables
D062/D063/D065/D066 4-96 SM Appendix
[0 to 500 / 100 / 1/step]
002 Attack Detect Time
Sets the length of time when the frequency of access to MFP features are
monitored.
[10 to 30 / 10 / 1 sec./step]
003 Productivity Fall Wait
Sets the wait time to slow down the speed of certification when an excessive
number of access attempts have been detected.
[0 to 9 / 3 / 1 sec./step]
004 Attack Max Number
Sets a limit on the number of requests received for certification in order to slow
down the certification speed when an excessive number of access attempts
have been detected.
[50 to 200 / 200 / 1 attempt/step]
5420 User Authentication
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been
enabled.
001 Copy
Determines whether certification is required before a user can use the copy
applications.
[0 or 1/ 0 /1]
0: On, 1: Off
011 Document Server
Determines whether certification is required before a user can use the document
server.
[0 or 1/ 0 /1]
0: On, 1: Off
To Next Page
Loading...
Need help?
General