2. Make sure no previous settings remain.
When there are previous settings remaining, press the [Reset] key.
3. Select the paper tray containing the paper that is the same size and orientation as the
originals.
4. Make sure that [Use Paper Tray Settg] is selected.
When [Use Paper Tray Settg] is selected, the paper size and orientation of the tray you have
selected will appear in [Orig.].
5. Place the originals.
6. Make desired settings.
7. Enter the number of copies with the number keys.
The maximum copy quantity that can be entered is 99.
8. Press the [Start] key.
When placing the original on the exposure glass, press the [ ] key after all originals are scanned.
Some functions such as Batch mode may require that you press the [ ] key when placing originals
in the ADF. Follow the messages that appear on screen.
9. When the copy job is finished, press the [Reset] key to clear the settings.
3. Copy
58
To Next Page
Loading...
Need help?
General
