6. Press [Change File Info.].
7. Press [Change Password].
8. Enter the password using the number keys.
You can use 4 to 8 numbers as the password for the stored file.
9. Press [OK].
10. Confirm the password by re-entering it using the number keys.
11. Press [OK] twice.
The icon appears next to a stored file protected by password.
12. Press [OK].
13. Log out.
Unlocking Stored Files
Only the file administrator can unlock files.
If you specify "Enhance File Protection", the file will be locked and become inaccessible if an invalid
password is entered ten times. This section explains how to unlock files.
"Enhance File Protection" is one of the extended security functions. For details about this and other
extended security functions, see p.259 "Specifying the Extended Security Functions".
1. The file administrator logs in from the control panel.
2. Press the [User Tools/Counter] key to switch to the normal screen.
If the message "You do not have the privileges to use this function." appears, press [Exit].
Specifying Passwords for Stored Files
189
To Next Page
Loading...
