8. Press [Change] for "Login User Name".
9. Enter a login user name, and then press [OK].
10. Press [Change] for "Login Password".
11. Enter a login password, and then press [OK].
12. Re-enter the login password for confirmation, and then press [OK].
13. Press [OK].
14. Press [Exit].
15. Press [OK].
16. Log out.
Specifying Login Details
The login user name and password specified in "Address Book Management" can be used as the login
information for "SMTP Authentication", "Folder Authentication", and "LDAP Authentication".
If you do not want to use the login user name and password specified in "Address Book Management"
for "SMTP Authentication", "Folder Authentication", or "LDAP Authentication", see "Registering Folders"
and "Registering SMTP and LDAP Authentication", Connecting the Machine/ System Settings.
• When using "Use Auth. Info at Login" for "SMTP Authentication", "Folder Authentication", or "LDAP
Authentication", a user name other than "other", "admin", "supervisor" or "HIDE***" must be
specified. The symbol "***" represents any character.
1. The user administrator logs in from the control panel.
2. Press [Address Book Mangmnt].
3. Press [Change].
2. Configuring User Authentication
40
To Next Page
Loading...
Need help?
General
