Copying onto Envelopes
This section describes how to copy onto regular size and custom size envelopes. Envelopes should be
fed from the bypass tray.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For
details about the relationship between paper weight and paper thickness and the sizes of envelopes that
can be used, see p.135 "Recommended Paper Sizes and Types".
About handling envelopes, supported envelope types, and how to load envelopes, see p.140
"Envelopes".
Before using this function, select [Envelope] for [Paper Type: Bypass Tray] under [Tray Paper Settings] in
User Tools. For details, see "System Settings", Connecting the Machine/ System Settings .
• The Duplex function cannot be used with envelopes. If the Duplex function is specified, press [1
Sided 2 Sided:TtoT] to cancel the setting.
To copy onto custom size envelopes, you must specify the envelope's dimensions. Specify the horizontal
and vertical length of the envelope.
: Horizontal
: Vertical
3. Copy
70
To Next Page
Loading...
