Specifying the Extended Security Functions
In addition to providing basic security through user authentication and administrator specified access
limits on the machine, security can also be increased by encrypting transmitted data and data in the
Address Book.
1. Log in from the control panel as an administrator with privileges.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ ] five times
5. Press [Extended Security].
6. Press the setting item you want to change.
If the setting you want to change is not displayed, press [ ] to move to another page.
7. Change the settings.
8. Press [OK].
9. Press [Exit].
10. Log out.
• The operation privileges of an administrator differs depending on the setting.
Specifying the Extended Security Functions
259
To Next Page
Loading...
Need help?
General
