Changing the Supervisor
This section describes how to change the supervisor's login name and password.
To do this, you must enable the user administrator's privileges through the settings under "Administrator
Authentication Management". For details, see p.16 "Specifying Administrator Privileges".
1. The supervisor logs in from the control panel.
For details on how to log in, see p.22 "Administrator Login Method".
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ ] four times.
5. Press [Program/Change Administrator].
6. Press [Program/Change Administrator].
7. Press [Supervisor].
8. Press [Change] for "Login User Name".
9. Enter the login user name, and then press [OK].
10. Press [Change] for "Login Password".
11. Enter the login password, and then press [OK].
12. Re-enter the login password for confirmation, and then press [OK].
13. Press the [Login/Logout] key.
A confirmation message appears.
If you press [Yes], you will be automatically logged out.
Supervisor
27
To Next Page
Loading...
Need help?
General
