6. Press [Program/Change Administrator].
7. Select the administrator number you want to reset.
8. Press [Change] for "Login Password".
9. Enter the login password, and then press [OK].
10. Re-enter the login password for confirmation, and then press [OK].
11. Press [Change] for "Encryption Password".
12. Re-enter the encryption password for confirmation, and then press [OK].
13. Press the [Login/Logout] key.
A confirmation message appears.
If you press [Yes], you will be automatically logged out.
• Log in as the supervisor only to change an administrator's password. Administrator's login names
cannot be changed.
1. Getting Started
26
To Next Page
Loading...
