Registering Functions in a Program
Depending on the functions, the number of programs that can be registered is different.
• Copier: 25 programs
•
Document Server: 25 programs
• Facsimile: 100 programs
• Scanner: 25 programs
The following settings can be registered to programs:
Copier:
Color mode, paper tray, Orig. (Settings for Originals), Auto Reduce/Enlarge, Red./Enlg.
(Reduce/Enlarge), Other Func. (Other functions), number of copies
Document Server (on the initial document print screen):
2 Sided: Top to Top, 2 Sided: Top to Bottom, Sort, Other Func. (Other functions), number of prints
Facsimile:
Transmission type, memory transmission/immediate transmission, Select Destination from Address
Book (except for folder destinations), Manual Entry, TX Status Report, Send Settings (except for
Subject and Sender Name)
Scanner:
Original, Send Settings (except for File Name, Security Settings in File Type, Sender Name, and
User Name and Password in Store File)
This section explains how to register functions in a program using copier function as an example.
1. Press the [Home] key on the top left of the control panel, and press the [Copier] icon on
the [Home] screen.
2. Edit the copy settings so all functions you want to store in a program are selected.
Registering Functions in a Program
45
To Next Page
Loading...
Need help?
General
