6. Press [Permit SSL/TLS Communication].
7. Select the encrypted communication mode.
Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext/Cleartext] as the encrypted
communication mode.
8. Press [OK].
9. Log out.
• The SSL/TLS encrypted communication mode can also be specified using Web Image Monitor. For
details, see Web Image Monitor Help.
Enabling SSL for SMTP Connections
Use the following procedure to enable SSL encryption for SMTP connections.
1. The network administrator logs in from the control panel.
2. Press [System Settings].
3. Press [File Transfer].
4. Press [SMTP Server].
5. Press [ ].
5. Enhanced Network Security
136
To Next Page
Loading...
