Problem Causes Solutions
"The image data size is not
valid. See the manual for
required data." appears.
The image data size is not
valid.
For details about file size for shortcut
image, see "Customizing the [Home]
Screen", Convenient Functions .
"The format of the image
data is not valid." appears.
The file format of the shortcut
image to be added is not
supported.
The file format of shortcut images to be
added must be JPEG. Specify the
image again.
• If you cannot make copies as you want because of paper type, paper size, or paper capacity
problems, use recommended paper. For details about recommended paper, see p.135
"Recommended Paper Sizes and Types".
•
Using curled paper often causes misfeeds, soiled paper edges, or slipped positions while
performing stack printing. When using curled paper, take the stiffness out of the paper with your
hands to straighten out the curl, or load the paper up side down. Also, lay paper on a flat surface
to prevent paper from curling, and do not lean it against the wall.
10. Troubleshooting
156
To Next Page
Loading...
Need help?
General
