Message Causes Solutions
"File being stored exceeded
max. number of pages per
file. Copying will be
stopped."
The scanned originals have
too many pages to store as
one document.
Press [Exit], and then store again with
an appropriate number of pages.
"Maximum number of sets is
n."
(A figure is placed at n.)
The number of copies
exceeds the maximum copy
quantity.
You can change the maximum copy
quantity from [Max. Copy Quantity] in
[General Features] under [Copier/
Doc. Srvr. Featr.]. For details about
Max. Copy Quantity, see "General
Features", Copy/ Document Server .
"Orig. scanned for diffrnt
fnctn."
A function of the machine
other than the Copier
function is being used such
as the Document Server
function.
Cancel the job that is being processed.
For example, press [Exit], and then
press the [Home] key. Next, press the
[Document Server] icon on the [Home]
screen, and then press the [Stop] key.
When the message appears on the
screen, follow the instructions to cancel
the job.
"Please wait." The destination list is being
updated from the network
using Web Image Monitor.
Wait until the message disappears. Do
not turn off the main power switch
while this message is displayed.
Depending on the number of
destinations to be updated, there may
be some delay before you can resume
operation. Operations are not possible
while this message is displayed.
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
You have tried to delete files
without the authority to do
so.
Files can be deleted by the person who
created the file. To delete a file which
you are not authorized to delete,
contact the person who created the
file.
"You do not have the
privileges to use this
function."
The logged in user name
does not have permission for
the selected function.
For details about how to set
permissions, see Security Guide
.
10. Troubleshooting
158
To Next Page
Loading...
Need help?
General
