Message Causes Solutions
"Problems with the wireless
board. Please call service."
(A "wireless LAN board" or
"Bluetooth unit" is referred to
as a "wireless board".)
The machine has detected a
Bluetooth failure, or it could
not detect a Bluetooth unit. It
may be incorrectly installed.
Check that the Bluetooth unit is installed
properly, or contact your service
representative.
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
You have tried to delete files
without the authority to do
so.
To check your access permission for
stored documents, or to delete a
document you do not have permission
to delete, see Security Guide .
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
The destination list is being
updated from the network
using Web Image Monitor.
Wait until the message disappears. Do
not turn off the main power switch
while this message is displayed.
Depending on the number of
destinations to be updated, there may
be some delay before you can resume
operation. Operations are not possible
while this message is displayed.
"You do not have the
privileges to use this
function."
The logged in user name
does not have permission for
the selected function.
For details about how to set
permissions, see Security Guide
.
Messages during Direct print from a removable memory device
Message Causes Solutions
"Unable to access the
specified memory storage
device."
The memory device used
cannot be recognized.
For details about the recommended
memory devices for the Direct printing
function from removable memory
devices, contact your service
representative. The USB flash memory
that features password protection or
other security features may not work
normally.
10. Troubleshooting
176
To Next Page
Loading...
Need help?
General
