13. Enable SSL/TLS.
For details about enabling SSL/TLS, see p.132 "Configuring SSL/TLS".
14. Change the administrator's user name and password.
For details about specifying administrators' user names and passwords, see p.21 "Using Web
Image Monitor to Configure Administrator Authentication".
15. Log out and then close Web Image Monitor.
16. Disconnect this machine from the administrator-only access network, and then connect it
to the general usage network environment.
• To enable higher security, see p.270 "Additional Information for Enhanced Security"
Before Using This Machine
13
To Next Page
Loading...
Need help?
General
