14. Select the printer job authentication level.
For a description of the printer job authentication levels, see p.63 "Printer Job Authentication".
If you select [Entire] or [Simple (All)], proceed to step 18.
If you select [Simple (Limitation)], proceed to step 15.
15. Press [Change Limitation Range].
16. Specify the range in which [Simple (Limitation)] is applied to "Printer Job Authentication".
Pressing [ ] allows you to display all items.
You can specify the IPv4 address range to which this setting is applied, and whether or not to apply
the setting to the parallel and USB interfaces.
17. Press [Exit].
18. Press [OK].
19. Press [Use Secure Connection (SSL)].
2. Configuring User Authentication
46
To Next Page
Loading...
