3. Press [Administrator Tools].
4. Press [ ] three times.
5. Press [Volm Use Cntr:Scheduld/Specfid Rst Stng].
6. Select one of [Every Month], [Specify Date] and [Specify Cycle].
7. Configure the conditions.
8. Press [OK].
9. Log out.
• If the machine is off at the specified time, the volume is reset when the power is turned on.
• If a date such as the 31st does not appear in the calendar under [Every Month], the volume is reset
at 0:00 on 1st of the following month.
3. Restricting Machine Usage
92
To Next Page
Loading...
