• Enter the separate setting number [1-4] or [default] and specify the IPsec SA (phase 2) Diffie-
Hellman group number.
• Specify the group number to be used.
•
Not specifying a group number displays the current setting.
IPsec SA (phase 2) validity period setting
msh> ipsec ike {1|2|3|4|default} ph2 lifetime "validity period"
• Enter the separate setting number [1-4] or [default] and specify the IPsec SA (phase 2) validity
period.
• Enter the validity period (in seconds) from 300 to 172800.
• Not specifying a validity period displays the current setting.
Reset setting values
msh> ipsec ike {1|2|3|4|default|all} clear
• Enter the separate setting number [1-4] or [default] and reset the specified setting. Specifying
[all] resets all of the settings, including default.
5. Enhanced Network Security
168
To Next Page
Loading...
Need help?
General
