3. Press [Unauthd. Copy Prevention].
4. Press [Unauthorized Copy Prevention Stg.].
5. Press [On], and then press [OK].
6. Press [Setting Priority (Drvr/Cmnd/Mach)].
7. Select the range within which the user can specify the pattern to be printed using the
printer driver.
• [Driver/Command]
Specifies all the content of the pattern to be printed using the printer driver.
• [Drvr/Cmnd (Most Stgs)]
Specifies the settings other than pattern type, color and density using the printer driver.
•
[Machine Setting(s)]
The pattern cannot be specified using the printer driver. The pattern specified using the
machine is printed.
8. Press [OK].
9. Log out.
6. Preventing the Leaking of Documents
192
To Next Page
Loading...
