Use the number keys to enter the number between "10" and "30", and then press [ ].
Default: [10]
• Authentication Delay Time
Specify the authentication delay time when an access violation is detected.
Use the number keys to enter the number between "0" and "9", and then press [ ].
Default: [3]
• Simultns. Access Host Limit
Specify the number of acceptable authentication attempts when authentications are delayed
due to an access violation.
Use the number keys to enter the number between "50" and "200", and then press [ ].
Default: [200]
• Depending on the values of the settings for [Max. Allowed No. of Access] and [Measurement
Time], you may frequently receive violation detection e-mail.
• If violation detection e-mail is received frequently, check the content and review the setting values.
7. Managing the Machine
266
To Next Page
Loading...
Need help?
General
