Insert a period and slash before the current directory.
3. Enter a number to select the workstation operating system that you are using.
Network printer install shell
Select your workstation OS type
1. SunOS 4.x.x
2. Solaris 2.x, Solaris 7-9 (SunOS5.x)
3. HP-UX
4. UnixWare
5. Linux
6. OpenServer
7. Quit
Enter <1-7>:
2
If you select "7", the installation shell script ends.
4. Enter the printer's IP address.
Enter Printer host IP address <xxx.xxx.xxx.xxx> [return=skip]:
192.168.15.16
If the host name of the printer has already been configured, press the [RETURN] ([ENTER]) key.
Nothing will be added to the /etc/hosts file.
5. Enter the printer's host name.
Enter Printer host name : nphost
If no IP address was entered in step 4, nothing is added to the /etc/hosts file.
6. Configure the printer name.
Enter logical printer name [default nphost_prn]
If you want to use the default name, press the [RETURN] ([ENTER]) key. Enter a new name, if you
want to use a different one.
The host name entered in step 5 followed by "_prn" appears in "default".
7. Set the print option.
Enter remote printer name [default lp]:
• Press the [RETURN] ([ENTER]) key, and printing with PostScript
®
is enabled.
• If you want to set the device option, enter the option parameter.
Enter remote printer name [default lp]:tray=tray1
• If you enter "text", text printing is enabled.
• If you enter "text", printing with PostScript is disabled.
1. UNIX Configuration
10
To Next Page
Loading...
