• The message "print session full" appears when the maximum number of print requests is reached.
• The maximum number of print sessions varies depending on the command.
•
When using the rsh or rcp command, the maximum number of print sessions is 5; when using the ftp
command, the number is 3.
rsh
% rsh host_name print < file_name
For example:
host name is nphost, file name is file1
% rsh nphost print < file1
• "host_name" is the name entered when executing the installation shell script.
• If you are using HP-UX, use the remsh command instead of rsh.
rcp
To specify and print the file
% rcp file_name [file_name...] host_name:
For example:
host name is nphost, file names are file1 and file2
% rcp file1 file2 nphost:
To print all of the files in a directory
% rcp -r directory_name host_name:
For example:
host name is nphost, directory name is directory
% rcp -r directory1 nphost:
• "host_name" is the name entered when executing the installation shell script.
• You can use wild cards ( * or ? ) for the file name.
ftp
Use the put or mput command depending on the number of files to be printed.
1. UNIX Configuration
18
To Next Page
Loading...
Need help?
General
