Parameter Value configured
username2 "character string" You can specify the phase 2 username for EAP-
TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
domain "character string" You can specify the login domain name for the
Radius server.
The characters you can enter are ASCII
0x20-0x7e (31 bytes), but not "@" or "\".
The default is blank.
password "character string" You can specify the login for the Radius server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
srvcert {on|off} You can set the server certificate.
The default is "off".
imca {on|off} You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is "off".
srvid "character string" You can set the server ID and sub domain of the
certificate server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
sub domain {on|off} You can specify whether or not to permit access
to the machine by users in subdomains use.
The default is "off".
Connectinfo Obtains connection information.
clear {a each command|all} Returns the selected setting to its default value.
If you specify "all", all settings will be restored to
their default values.
Remote Maintenance Using telnet
167
To Next Page
Loading...
