2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Address Book Management].
5. Check that [Program / Change] is selected.
6. Select the name whose folder you want to register.
You can search by the registered name, folder name, or e-mail address.
7. Press [Folder].
8. Press [FTP].
9. Press [Change] under "Server Name".
10. Enter the server name, and then press [OK].
11. Press [Change] under "Path".
12. Enter the path, and then press [OK].
You can enter an absolute path, using this format: "\user\ home\username"; or a relative path, using
this format: "directory\sub-directory".
If you leave the path blank, the login directory is assumed to be the current working directory.
You can also enter an IPv4 address.
You can enter a path using up to 256 characters.
13. To change the port number, press [Change] under "Port Number".
5. Registering Addresses and Users for Scanner Functions
228
To Next Page
Loading...
