Ricoh aficio MP W3601 - Configuring Access Permissions for Stored Files

• telnet: Can be used for specifying the setting.
[Network] [IPv6 Stateless Address Autoconfiguration]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [DNS Configuration] [Auto-Obtain (DHCP)]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [DNS Configuration] [Specify] "DNS Server 1-3"
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [DDNS Configuration]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [IPsec]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [Domain Name] [Auto-Obtain (DHCP)]
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [Domain Name] [Specify] "Domain Name"
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [WINS Configuration] [On] "Primary WINS Server"
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [WINS Configuration] [On] "Secondary WINS Server"
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [WINS Configuration] [On] "Scope ID"
• Web Image Monitor: Can be used for specifying the setting.
• telnet: Can be used for specifying the setting.
[Network] [WINS Configuration] [Off]
• Web Image Monitor: Can be used for specifying the setting.
Using Utilities to Make Network Settings
93
2