Training Retries
Sets the number of training retries to be repeated before
automatic fallback takes effect.
• 1 Time. Reduce speed to next level after 2 PPR commands.
• 2 Times. (Default) Reduce speed to next level after 3 PPR
commands.
• 3 Times. Reduce speed to next level after 4 PPR commands.
• 4 Times. Reduce speed to next level after 2 PPR commands.
Encoding
Selects data compression mode for TX/RX. The first selection is
the most complex, the third selection the least complex:
• MMR+MR+MH (Default)
•
MR+MH
• MH
Protocol Definition Timer
T0 Timer
Timeout for the remote station to respond in automatic send
mode.
• Default: 55 sec.
•
Range: 35 to 140 sec.
T1 Timer
Sets the DIS waiting time.
• Default: 40 sec.
•
Range: 30 or 40 sec.
T4 Timer
Sets the time interval between command signal transmissions.
• Default: 3 sec.
•
Range: 3 or 4.5 sec.
RX Settings
Tone Sound Monitoring
Determines when tones are monitored.
• No Monitoring
•
Up to Phase B
• All TX Phases
Utilities
191
To Next Page
Loading...
