Equalizer
Sets the equalizer training level to be applied if
training fails due to poor line connection.
• Automatic. (Default)
•
4 Points.
• 16 Points.
Redialing
Sets up resending if a communication error occurs.
• Disabled. (Default)
•
Not Disabled.
Symbol Rate
Limits the transmission speed range in V.34 mode by
masking the rates of selected symbols.
• Default: Not Used
•
Range: 2400 to 3429 Sym/sec.
Report
Service Data List Prints the Service Data List report.
Error Log List Prints the Error Log List report.
T.30 Protocol List Prints the T.30 Protocol List report.
Service Data List Sample
Error Log List (Error Log History List) Report
The error log history records the most recent 40 errors only.
Utilities
195
To Next Page
Loading...
