Depending on the security settings, certain print jobs may not be displayed.
3. Select the file you want to delete using the [ ] or [ ] key, and then press [Delete].
The password screen appears.
4. Enter the password using the [ ], [ ], [ ] or [ ] key, and then press the [OK] key.
The delete confirmation screen appears.
A confirmation screen will appear if the password is not entered correctly. Press [Clear] to enter the
password again.
If you forget your password, ask your network administrator for help.
5. Press [Delete].
The selected file is deleted.
If you do not want to delete the file, press [Cancel].
Hold Print
Use this function to temporarily hold a file in the printer, and print it from the computer or the printer's control
panel later.
• A Hold Print file cannot be stored if:
• the total number of Sample Print, Locked Print, Hold Print, and Stored Print files in the printer is
over 100. (The maximum number varies depending on the volume of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the printer contain over 9,000 pages in total.
• If a Hold Print file has not been stored properly, check the error log on the control panel.
Printing from the Print Job Screen
109
To Next Page
Loading...
Need help?
General